Professional Race (PRO-RACE) Full Aluminium Billet, 3 Pedal, Hydraulic Clutch, Brake Bias Performance Pedal Box.
Part Number: OBPPRCV306DBW.
Kit Contents: PRO-RACE 3 Pedal Hydraulic Clutch Pedal Box with 1x Linear Twin Potentiometer, 1 x Bias Bar, 3 x Master Cylinders 0.625 Front B / 0.7 Rear B / 0.75 Clutch, 3 x Reservoirs, 1 x Reservoir Bracket & 1 x Cable Adjuster
Mounting Location: Floor Mounted Cockpit Fit.
Pedal Ratio: 5.05:1 to 5.45:1.
Weight: 5.8 lbs (2.6 Kg) * (With Bias Bar, without Master Cylinders).
Approx, Dimensions: Width 260mm, Pedal Height 280mm, Box Depth 140mm, Depth Including Master Cylinders 250mm.
Optimum Balance Products Ltd (obp Ltd) PRO-RACE range of pedal boxes are proving to be very popular with race team’s worldwide.
These pedal boxes represent a major step forward in car control, giving the driver better feel, greater dexterity and the most important bit.
The PRO-RACE range is lightweight, flexible and ergonomically efficient.
All 3 pedals pivot on oil impregnated bushes, giving an incredible smooth motion with very little maintenance.
Special Features Pro-Race V3 Pedal Boxes:
Aircraft Grade Aluminium Billet Pedals, Pads & Box
Hard Anodized Protected Finish
Adjustable Brake Pedal Ratio
Adjustable Up, Down and side to Side Pedal Pads
Responsive Accelerator Spring Return
Adjustable Accelerator Stop
Adjustable Clutch Overthrow Stop
Upgraded Strength and Rigidity Design
Fully Adjustable Brake Bias / Balance System
DBW Electronic Accelerator Upgrade
2 Year Warranty
This Linear Potentiometer is designed to withstand the harsh environment in a Motorsport application. Using proven ‘conductive plastic’ technology, the sensors offer high performance and reliability.
Maximum Supply Voltage – 40 VDC,
Resolution – Essentially Infinite,
Repeatability - ≤0.01mm,
Operational Speed - 10 M/s max,
Mechanical Life - > 25 Million Cycles,
Recommended Wiper Current - < 10μA,
Independent Linearity - ≤ +/- 0.5%
Connection & Output Details
6 Core Cable
Red = +V
Black = 0V
Yellow = Signal
Brown = +V
Blue = 0V
White = Signal
Fully Closed = +Vmax
Fully Open = 0V
The displacement signals may be reversed by swapping the connections to the Red & Black wires or Brown & Blue wires, providing +Vmax output when Full Open & 0V when fully closed.
DO NOT connect +V supply to the Yellow and White (signal) wires, as this may cause damage to the sensor element.
All our pedal boxes are manufactured by professionals for professionals in our own factory based in the UK.
NOTE: DUE TO STOCK LEVELS, WE CURRENTLY HAVE A LEAD TIME ON THESE PRODUCTS. FOR MORE INFORMATION PLEASE CALL 01487 812301.